All phases of the cryo chamber operation are controlled by a computer – cooling and therapy phase, the preparation for the next therapy and the drying phase. The computer maintains a constant temperature during the whole therapeutic cycle which enables the maximum possible therapy effect. All the important data during the therapy phase – the desired and the current temperature, the remaining time until the end of the therapy and the oxygen quantity in the room – are shown on the computer display. This enables a statistics management – number of performed cryotherapies with one filling and the total number of therapies. Unlike competitive devices, the advanced software enables an easy handling where no prior knowledge and experiences about the settings is needed.
The cryo chamber is equipped with a number of safety systems. In case of an uncontrolled rise of the temperature there is a possibility of a manual blockade by the operator or the computer shuts the device down automatically. The device is also shut down by the computer if the desired temperature is not reached within the expected time.
The cryo chamber operates according to an innovative principle of cooling the air which is then blown into the chamber. The cooled air is evenly distributed inside the whole chamber and evenly cools the body. With this approach the effects on the body are essentially more active. Compared with the conventional chambers the same effects are reached at lower temperatures. The computer controlled process also enables an even cooling without causing temperature shocks, which improves the efficiency of the therapies even more with regard to the conventional chambers.
|Total height||127 cm|
|Total length||140 cm|
|Total width with doors closed||96 cm|
|Total width with doors open||160 cm|
|Minimal height||250 cm|
|Minimal area surface||10 m2|
|Nitrogen consumption for one process||3 – 5 kg|
|Total weight of the device||340 kg|
|Minimal height requirement of the user||155 cm|
|Noise level||70 db< (lower than 70 db)|
|Maximal electrical power of the device in total||750 W, 4,1 A|
|Necessary feeder voltage||230 V, 50 Hz|
|Possible temperature range||from – 120 °C to – 160 °C|
|Recommended temperature||-140 °C for standard users, -150 °C for sportspersons|
|Possible therapy time range||from 30 seconds to 2 minutes and 30 seconds|
|Recommended therapy time||2 minutes|
|– Minimally 10 minutes must pass between intdidual therapies.|
Contact us by filling in the contact form and we will get back to you as soon as possible.